James Marine
Boat Docks in Seven Points, TX

Boat Docks — Seven Points

Boat Docks in Seven Points, TX

Custom boat docks, boat lifts, and waterfront structures built to last — from personal lakefront docks to full marina installations.

Boat Docks in Seven Points: what to expect

Seven Points sits where Cedar Creek Lake's shoreline type shifts in the space of a few blocks — open main-body frontage along the Hwy 274 corridor carries afternoon fetch from the southeast, while the Long Cove and Hidden Cove arms are sheltered enough for lighter fixed frames. TRWD permitting runs through the same shoreline office as anywhere on Cedar Creek, and we design each lot independently because the spec that's right at an exposed point near the bridge is overkill in a protected cove two streets away.

  • TRWD shoreline-office submittal covers every Seven Points dock — decking, electrical, and lighting must meet current standards in the permit packet.
  • Open main-body and Hwy 274 bridge-adjacent lots get deeper pilings and breakwater geometry sized to southeast main-body fetch; sheltered Long Cove and Hidden Cove lots run a lighter two- to four-piling rigid frame.
  • We set fixed-height decking for the lake's normal 4-foot range, per Texas Parks and Wildlife.
  • Sandy soil over clay sublayer gives reliable piling embedment on Cherokee Shores and the Hwy 274 corridor; we don't typically need to over-drive past Henderson County norms here.
  • We mobilize through Seven Points for a significant share of our Cedar Creek schedule, so crew and barge routing are already dialed in for this stretch of the lake.

Boat Docks on the ground in Seven Points

Seven Points covers a wide range of shoreline — open-water frontage on the main body, sheltered coves on the eastern arm, and tight residential runs near the Hwy 274 bridge. That variation means dock specs differ block by block: deeper pilings and breakwater geometry on the open frontage, lighter rigid systems in the protected coves. Sandy soil over clay sublayer makes Henderson County–standard retaining wall drainage work as designed without extra French-drain capacity.

Recent work near: Long Cove, Hidden Cove, Cherokee Shores, Hwy 274 corridor.

All Seven Points, TX waterfront work →

Boat Docks nearby: Cedar Creek Lake. Who we build for here: Lakefront Homeowners, Vacation Property Owners, Real Estate Investors.

What affects the price in Seven Points

  • Dock size, shape, and total square footage
  • Decking material — pressure-treated, composite, or aluminum
  • Number and type of pilings (wood, steel, or concrete)
  • Boat lift size and capacity
  • Water depth and bottom conditions

Boat Docks in Seven Points: questions

Full FAQ →
Why do dock specs vary block by block in Seven Points?+

Seven Points covers a wide range of shoreline — open-water frontage on the main body, sheltered coves on the eastern arm, and tight residential runs near the Hwy 274 bridge. That means deeper pilings and breakwater geometry on open frontage and lighter rigid systems in protected coves; we spec to your exact lot, not a template.

Why does a Seven Points main-body dock cost more than a cove dock?+

Open-water frontage on the main body takes longer fetch and more wind, so it needs heavier pilings, bracing, and breakwater geometry than a protected eastern-arm cove. That extra structure is the main cost driver here, which is why two lots a few blocks apart can land at very different numbers.

Can you replace an aging dock near the Hwy 274 bridge?+

Yes. The tighter residential runs near the bridge see a lot of dock replacements, and we step the build up to current TRWD decking, lighting, and electrical standards as part of the packet. Where land access is tight on those lots, we fabricate sections and barge-deliver them finished.

How long does a Seven Points dock build take from permit to launch?+

The timeline turns on the TRWD shoreline review, which we file up front, and on whether your lot is open-water or cove frontage — open-water builds carry heavier fabrication for the deeper pilings and breakwater work.

What permits are needed for a boat dock?+

Texas dock permits depend on which body of water you're on:

  • Cedar Creek Lake — Tarrant Regional Water District (TRWD). Written review limits: about 8 weeks to the end of technical review (10 business days to accept, up to 30 business days for technical review).
  • Lake Athens — Athens Municipal Water Authority (AMWA). 2–4 weeks; strict cap-elevation rules.
  • Lake Palestine — Upper Neches River Municipal Water Authority (UNRMWA). 3–5 weeks.
  • Lake Tyler — City of Tyler shoreline office. Pre-clearance required before fabrication.
  • Richland-Chambers — TRWD (same as Cedar Creek). About 8 weeks to the end of technical review under the same written limits.
  • Private impoundments — Usually no agency permit, but HOA architectural review still applies.

We pull every permit as part of the contract — you sign once and we run the agency loop. Full breakdown in our permits article.

What decking material should I choose?+

Three serious options:

  • Pressure-treated pine — cheapest upfront. Requires annual sealing. Most common.
  • Composite — mid-tier price, no sealing, color-stable for 10–15 years.
  • Marine-grade aluminum — premium. Stays cooler underfoot, lasts 40+ years, splinter-free.

Families who walk their dock barefoot in July almost always upgrade to composite or aluminum on the second dock. If you'll only own the house for 3–5 years, pressure-treated is the right call.

Can you build a covered dock or boat house?+

Yes. We build covered single-slip docks, double-slip boat houses, and open T-head docks. Covered structures need additional permitting on most lake authorities (TRWD on Cedar Creek and Richland-Chambers caps roof pitch at 6 in 12 and allows two stories at most) — we package that into the application.

If you're considering adding a roof later, tell us at the design stage. Adding a roof to an existing dock often requires structural retrofit of the pilings, which is more expensive than building it covered from day one.

How long does dock construction take?+

Standard residential dock build, on-site work:

  • Piling driving — 2–4 days depending on bottom conditions
  • Framing — 2–3 days
  • Decking and hardware — 2–4 days
  • Electrical and final — 1–2 days

So 1–2 weeks of on-site work for most residential dock builds. The real timeline driver is permitting — see the permits question above. We schedule construction to start the week the permit clears.

How much does a boat dock cost?+

Honest ballparks for East Texas lakes:

  • Basic 12×16 ft fixed dock — $14,000–$22,000
  • Add a covered roof — $24,000–$38,000
  • Add a single boat lift and slip cover — $40,000–$65,000 all-in
  • Floating dock systems (shallow banks that lose depth in a dry year) — $35,000+ to start

Full pricing breakdown by piling type, decking, and lake authority is in our cost article.

Want your exact number? We walk your shoreline and write a firm dock quote you can compare against any other bid — free, no obligation.

Which East Texas lakes do you build docks on?+

We're the East Texas dock builder for Cedar Creek Lake, Lake Tyler, Lake Palestine, Lake Athens, and Richland-Chambers, with each design engineered to that lake's pool, fetch, and bottom. We pre-clear every design with the right authority, whether that's TRWD, AMWA, UNRMWA, or the City of Tyler, and pull the permits in-house so you sign one contract and we run the agency loop.

What pilings do you use and how are they installed?+

We use wood, steel, or concrete pilings depending on your bottom conditions and dock size, and every piling is driven to refusal so it bottoms out on solid material. Above the waterline we frame with galvanized fasteners and stainless connectors, and we rough in the electrical for lighting and lift power. The site visit includes a water-depth and bottom-condition assessment so we spec the right piling before fabrication.

What does my dock estimate include?+

Every quote starts with a free site visit and a water-depth and bottom-condition assessment. From there the build includes lake-authority permit submittal, pilings driven to refusal with marine-grade hardware, framing with galvanized fasteners and stainless connectors, decking in your chosen material, electrical rough-in for lighting and lift power, and a post-completion inspection with a homeowner walkthrough. We walk your shoreline and write a firm quote you can compare against any other bid.

Free instant estimate

See what your boat docks in Seven Points could cost — in under a minute

Typical boat docks projects run $22k–$52k. Get a tailored range for your site in seconds.

No phone call required to see your number — answer a few quick questions and the estimator does the rest.

Quote your Seven Points project

Get My Free Estimate